UISP Switch 1.11.1 adds the below improvements and fixes.

Improvements

• Web Interface - Added Multicast Group table for better monitoring of multicast behavior.
• Flood ND group option was added into MLD Snooping.
• Added IPv6 MLD querier.
• SNTP Client now supports IPv6 address.
• [UISP-S-Plus]: Added support for IGMP/MLD Snooping

Bugfixes

• Port with disabled STP was reporting a forwarding state.
• IGMP snooping was not working if IGMPv3 join packet contains a reserved address.
• IGMP snooping querier IP was not set properly.
• Rename the default VLAN is now allowed.
• [UIPS-S/UIPS-S-PRO]: Port mirror was not blocking ingress traffic until restart.
• [UISP-S-Plus]: Default gateways are properly removed now when SLAAC is turned off.

Additional information

This version is not compatible with password generator used in UISP Application older than 2.4.126.

UISP Switch 1.10.2 adds the below improvements and fixes.

Improvements

• [UIPS-S/UIPS-S-PRO]: Upgraded the SSH Server.

Bugfixes

• Disabled weak SHA1 SSH ciphers.
• Disabled weak SHA1 HTTPS ciphers.

Additional information

This version is not compatible with password generator used in UISP Application older than 2.4.126.

UISP Switch 1.10.1 adds the below improvements and fixes.

Improvements

• Added Storm Control support.
• Added Port Mirroring.
• Upgraded the SSH server.
• DHCP snooping configuration on LAG interfaces in mobile apps.
• [UISP-S / UISP-S-Pro] Speed up port trunk configuration.
• [UISP-S-Plus] Added Port Mirroring configuration into CLI.
• [UISP-S-Plus] Improved MSTP configuration support in CLI.

Bugfixes

• [UISP-S / UISP-S-Pro] Fixed LED behavior when BLE is connected.
• [UISP-S / UISP-S-Pro] Fixed bug when STP discarding state was not visible on ports in LAG.
• [UISP-S / UISP-S-Pro] Fixed possible CLI crash during listing a log.
• [UISP-S-Plus] - Fixed bug when VLAN filtering doesn't work properly for ingress packets.
• [UISP-S-Plus] - Fixed rare stability issues when configuring VLANs on LAG ports.

Additional information

This version is not compatible with password generator used in UISP Application older than 2.4.126.

UISP Switch 1.9.0 adds the below improvements and fixes.

Improvements

• Updated Local Web Interface with various fixes and improvements:
• Tooltips are not displayed correctly in some situations.
• Fixed bug when username can not be changed in some situations.
• A strong password is now required for newly created passwords.
• Upgraded the SSH server.
• Updated Web Server SSL cipher list.
• [UISP-S-Plus] - Enhanced MSTP configuration in CLI.

Bugfixes

• [UISP-S-Plus] - Fixed bug when management access may be lost after listing mac-table.

Additional information

This version is not compatible with password generator used in UISP Application older than 2.4.126.

UISP Switch 1.8.1 adds the below improvements and fixes.

Improvements

• Changed minimum password length to 12 for newly created passwords.
• Updated UISP Application connector.
• [UISP-S/UISP-S-Pro] Speed up configuring address when SLAAC is being enabled.

Bugfixes

• Fixed minor bugs in the Local Web Interface.
• [UISP-S/UISP-S-Pro] Fixed errors when trying to set half-duplex speeds on LAG ports.
• [UISP-S/UISP-S-Pro] Fixed an issue that System log is disabled after backup restore.
• [UISP-S-Plus] Fixed huge traffic sent to management interface causing a STP malfunction.
• [UISP-S-Plus] Fixed bug when the device may be temporarily stuck when accessing the Mac Table.
• [UISP-S-Plus] Fixed bug when SFP ports do not link at 1 Gbps in some situations.
• [UISP-S-Plus] Fixed an issue where ports in a LAG might be set to unsupported half-duplex speed.
• [UISP-S-Plus] Fixed STP port priority on LAG ports.
• [UISP-S-Plus] Fixed losing STP Edge port configuration after reboot.
• [UISP-S-Plus] Fixed STP loop over inactive LAG port.

UISP Switch 1.8.0 adds the below improvements and fixes.

Improvements

• Added Remote Access feature via the UISP Application.
• VLAN page now applies all changes after save.
• Updated UISP Application connector.
• [UISP-S/UISP-S-Pro] Improved boot time when static IP configuration is enabled.
• [UISP-S-Plus] Added full CLI configuration support.
• [UISP-S-Plus] HTTPS certificate is re-generated at every boot.

Bugfixes

• [UISP-S-Plus] Fixed STP parameters not applying after boot.
• [UISP-S-Plus] Fixed CVE-2023-6779 and CVE-2023-6780 vulnerabilities.

UISP Switch 1.7.0 adds the below improvements and fixes.

Improvements

• Added support for remote access to the local web interface. This requires UISP Application 2.4.61 and newer.
• Added the possibility to define username during initial setup.
• Added dialog to change the username.
• Added port name to VLAN tooltip.

Bugfixes

• Fixed link to UISP on devices connected to the UISP Application running on the UISP Console.
• Fixed 0.00ms value in Ping Tool.
• Fixed MAC Address and IP Address columns' width on the MAC Table screen.
• Fixed the style of several tooltips in the user interface.

Additional information

It is necessary to use the latest iOS UISP Mobile Application 2.31.0+ or Android UISP Mobile Application 2.31.6+ for setup via BLE.

UISP Switch Plus 1.2.0 adds the below improvements and fixes.

Improvements

• Added support for remote access to the local web interface. This requires UISP Application 2.4.61 and newer.
• Added the possibility to define username during initial setup.
• Added dialog to change the username.
• Added port name to VLAN tooltip.

Bugfixes

• Fixed link to UISP on devices connected to the UISP Application running on the UISP Console.
• Fixed 0.00ms value in Ping Tool.
• Fixed MAC Address and IP Address columns' width on the MAC Table screen.
• Fixed the style of several tooltips in the user interface.

Additional information

It is necessary to use the latest iOS UISP Mobile Application 2.31.0+ or Android UISP Mobile Application 2.31.6+ for setup via BLE.

UISP Switch 1.6.0 adds local web interface support.

Local Web Interface

The UISP-S and UISP-S-Pro now support a local web interface providing the following sections.

Dashboard

• View the port table, throughput statistics and port utilization.
• Configure port settings such as PoE, LAGs, STP, and Isolation.
• Reset the PoE power on ports and test connected cables.
• View detailed traffic statistics, connected devices and errors on ports.

VLANs

• Create and assign VLANs to one or more ports.
• Exclude, Untag or Tag VLANs.
• Define ports as trunk to forward multiple VLANs.

Settings

• Configure the IPv4 and IPv6 and management VLAN settings.
• Customize the Spanning Tree version, priority and timers.
• Configure features such as Jumbo Frames, SNMP, and Syslog.
• Backup, restore, locate and upgrade the switch.

Tools

• View learned MAC addresses on ports and the associated VLAN.
• View detailed information of connected devices such as the IP address and hostname.
• Ping connected devices or a specific IP address or hostname.
• View other discovered devices.

UISP Switch 1.5.2 includes the below bugfixes and improvements.

Improvements

• Optimized STP to lower the CPU load.

Bugfixes

• [UISP-S-Pro] Fixed low LCD brightness which some units may suffer from.
• [UISP-S-Pro] Fixed displaying of PoE mode and status on the LCD.
• Fixed issue when factory-reset sometimes doesn't reset PoE status.

Firmware upgrade compatible with UISP Switch, UISP Switch Lite and Early Access UISP Switch Pro.

This release only fixes an issue with the display module on some UISP Switch Pro units.

Bugfixes

• Fix LCM incorrectly reporting there is an issue with booting.

Firmware upgrade compatible with UISP Switch, UISP Switch Lite and Early Access UISP Switch Pro.

Improvements

• Added CLI access via UISP Controller (requires UISP v1.4.5 or newer).
• Improved detection of client information (IP address and hostname) in MAC table.
• Added temperature reporting on UISP-S-Pro LCM.
• Optimized speed of generating of the support file.
• Added DHCP client support in the rescue mode.

Bugfixes

• Fixed various security fixes in OpenSSL and zlib libraries.
• Fixed newly discovered out-of-bound reads in crafted LLDP packets.
• Fixed log spam about out-of-order Bluetooth packets.
• Fixed system LED indication failing after some time.
• Fixed incorrect PoE status after backup restore.
• Fixed "Could not chdir to home directory" message on SSH login.
• Fixed uptime reported on UISP-S-Pro LCM.
• Fixed various minor issues on UISP-S-Pro LCM.
• Fix loss of address from DHCP with short DHCP lease times.
• Fix SFP module link issues on UISP-S-Pro

Firmware upgrade compatible with UISP Switch and UISP Switch Lite.

Improvements

• Fixed newly discovered out-of-bound reads in crafted LLDP packets.
• Fixed various security fixes in OpenSSL and zlib libraries.
• Fixed log spam about out-of-order Bluetooth packets.
• Fixed system LED indication failing after some time.
• Fixed "Could not chdir to home directory" message on SSH login.

New firmware for UISP Switch and UISP Switch Lite. Use UISP 1.4.2 or newer for best compatibility.

Improvements

• Added indication of active Bluetooth connection using the system LED.
• Added support for showing STP state in UISP.
• Added landing page pointing to UISP apps when switch is accessed over HTTP/S.
• Improved Bluetooth initialization speed on startup.
• Improved compatibility with UISP v1.4.0 and newer.
• Default device name is based on device's MAC address.

Bugfixes

• Fixed possible out-of-bounds read in crafted LLDP packets.
• Fixed race condition in configuration restore state.
• Fixed UISP Switch incorrectly showing as UISP Switch Lite in mobile apps.

Additional information

This firmware is not compatible with UNMS Switch Lite (early access product without BLE management and 4-pair PoE).

This firmware fixes issues discovered on UISP Switch Lite. Upload the firmware to UISP's Firmware Manager to update your devices to this firmware version. Please use UISP 1.3.7 or newer for best compatibility.

Note this firmware is not compatible with UNMS Switch Lite (early access product without BLE management and 4-pair PoE).

Improvements

• Fixed 4-pair PoE output.
• Fixed potential vulnerability via crafted LLDP packets.

This release brings several bugfixes of UISP Switch Lite firmware discovered during testing of the release v1.3.0-beta.1. Upload the firmware to UISP's Firmware Manager to update your devices to this firmware version. Please use UISP 1.3.4 or newer for best compatibility.

Note this firmware is not compatible with UNMS Switch Lite (early access product without BLE management and 4-pair PoE).

Bugfixes

• Fixed BLE management access loss when device is reset to defaults using the button.
• Fixed IPv6 management access.
• Fixed showing and setting of static DNS servers.
• Fixed high CPU utilization with plugged SFP modules.
• Fixed possible deadlock when processing API requests.